Proto Sheild Supplemental Kit Does NOT include Freescale Freedom Platform Description: The Proto Shield Supplement Kit for the Freescale Kinetis KL25Z Freedom Platform contains the items specified in the table below Description Samtec Socket, 2.54mm, 1 x 6 Pos Qty Part Number 1 SSW-106-01-T-S Samtec Socket, 2.54mm, 1 x 8 Pos 2 SSW-108-01-T-S Samtec Socket, 2.54mm, 1 x 10 Pos 1 SSW-110-01-T-S Samtec Header, 2.54mm, THT VERT, 2 Pos 3 TSW-102-07-T-S Multicomp Mini USB cable 1 SPC20060 Arduino Proto Shield Kit 1 A000083 Arduino Proto Shield Kit Content: Material Qty Straight single line pinhead connectors 40 x 1 1 Straight single line pinhead connectors 3 x 2 1 PCB Pushbutton 2 Red LED 1 Yellow LED 1 Green LED 1 10K Resistors 1/4W 5 220 Resistors 1/4W 5 1K Resistors 1/4W 5 Ordering Information Description Part Number Proto Shield Supplemental Kit, Kinetis KL25Z Freescale Freedom Platform FRDMKL25Z SHIELD BUNDLE www.element14.com www.farnell.com www.newark.com Page <1> 23/01/13 V1.1 Proto Sheild Supplemental Kit Does NOT include Freescale Freedom Platform On the Proto Shield PCB you will find: * ICSP header * Led1 and Led2 headers (with resistor headers) * S1 Button header * SOIC prototyping area up to 14-pin SOIC chip, narrow medium or wide package. * 10 bigger holes for special needs * Long and easy-to-solder ground / 5V rails The 1.0 standard pinout consist in 4 additional pins: 2 of them placed near the AREF pin, that are used for TWI communication, and the other 2 are placed near the RESET pin. The IOREF pin is used to adapt the shield to the board on which is mounted. The last one is not connected and is reserved for future uses. Attaching Single Row Headers to the Freedom Platform This special bundle includes headers that can be soldered to the board to give you access to additional ArduinoTM-compatible hardware - commonly referred to as "Shields". To attach the single row headers to the Freedom Platform, please reference the "FRDM-KL25Z Single Row/Arduino Header Layout" diagram. Attaching these headers to the outside row of I/O holes on the board give you access to the unlimited potential of access to peripherals designed for ArduinoTM-compatible hardware. Using optional dual row headers are also acceptable, but are not needed to use ArduinoTM-compatible hardware/ shields. Header Positions on Board SAMTEC SSW-106-01-T-S J10 SAMTEC SSW-108-01-T-S J1,J9 SAMTEC SSW-110-01-T-S J2 SAMTEC TSW-102-07-T-S J3, J4, J11 * * Three of these headers have been included for additional/ advanced features that are available on positions J3, J4, and J11 and are not necessary for use with ArduinoTM-compatible hardware/ shields . Details of their functionality can be found in the Freedom Platform documentation. Note: This bundle can also be used with the Freedom Development Platform KL05Z - Newark Order Code 53W2646 www.element14.com www.farnell.com www.newark.com Page <2> 23/01/13 V1.1